BFHFQ - WHITE ENAMEL
- MSDS: BFHFQ
- Manufacturer: CORONADO PAINT CO 308 OLD COUNTY RD EDGEWATER FL
- Product Name: WHITE ENAMEL
- National Stock Number: 8010-00-598-5053
Product Identification
Product ID:WHITE ENAMEL
MSDS Date:01/01/1987
FSC:8010
NIIN:00-598-5053
MSDS Number: BFHFQ
Responsible Party
Emergency Phone: 904-428-6461
Cage: 33200
Contractor
Telephone: 904-428-6461
Cage: 33200
Ingredients
ALKYD RESIN
Fraction By Weight: 14.0%
PETROLEUM DISTILLATES (NAPHTHA OR RUBBER SOLVENT)
CAS: 8002-05-9
RTECS: SE7449000
Fraction By Weight: 23.0%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM; 8990
LEAD NAPHTHENATE
RTECS: OG2025000
Fraction By Weight: <1%
Hazards
Effects of Overexposure:IRRITATION OF EYES,NOSE AND THROAT.
HEADACHE,INTOXICATION & DROWSINESS MAY OCCUR. DRYING OF SKIN
First Aid
First Aid:IN CASE OF CONTACT,FLUSH THROUGHLY WITH WATER. FOR
INHALATION, REMOVE TO FRESH AIR AND ADMINISTER OXYGEN. CALL
PHYSICIAN. SKIN CONTACT:WASH WITH MILD SOAP & WATER,APPLY A MILD
SKIN CREAM,INSEVERE CASE S,CONTACT A PHYSICIAN
Fire Fighting
Flash Point:115F SETA
Lower Limits:0.7
Upper Limits:6.00
Extinguishing Media:CO2 OR DRY CHEMICAL EXTINGUISHER OR FOAM
Fire Fighting Procedures:TREAT AS CLASS B FIRE
Unusual Fire/Explosion Hazard:VAPOR MAY FORM EXPLOSIVE MIXTURE WITH
AIR.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCE OF IGNITION. AVOI BREATHING
OF VAPORS OR CONTACT WITH EYES. CONTAIN SPILL IN A DIKED AREA TO
MINIMIZE VAPORS
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 100F. IF NECESSARY
TO TRANSFER CONTENTS TO ANOTHER CONTAINER,GLASS,PLASTIC,SPECIAL
LINED STEEL OR TIN ARE ACCEPTABLE
Other Precautions:OTHER HANDLING IN ACCORDANCE WITH NFPA BULLETIN 30
AND 77. AVOID PROLONGED OR REPEATED PERSONAL CONTACT.
Exposure Controls
Respiratory Protection:WHERE HIGH CONCENTRATIONS OF VAPOR EXIST,USE ALL
PURPOSE CANISTER
Ventilation:LOCAL EXHAUST-FROM FLOOR AND LOW AREAS
Protective Gloves:IMPERMABLE
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:APRON,BARRIER CREME
Supplemental Safety and Health
ALL ELECTRICAL EQUIPMENT MUST BE EXPLOSION-PROOF
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:315F
Vapor Pres:2
Vapor Density:4.9
Spec Gravity:1.56
Evaporation Rate & Reference:SLOWER THAN NBUACT
Solubility in Water:VERY SLIGHT
Appearance and Odor:WHITE OPAQUE LIQUID,PETROLEUM DISTILLATE ODOR
Percent Volatiles by Volume:46.6
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:EXCESSIVE HEAT,SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE
Disposal
Waste Disposal Methods:IF CUSTOM DISPOSAL SERVICE IS NOT AVAILABLE,
LARGE QUANTITIES MAY BE BURNED IN A COMBUSTION CHAMBER BY A
COMPETENT ENGINEER
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.